USDX Menü

 

Ⓛeft  Linker Knopf (MENU)

Ⓔ Encoder  Großer Drehknopfauf der rechten Seite

Ⓡight Rechter Knopf (EXIT)

 ⥀ = turn, Drehen

– = hold button (longer), Knopf länger halten 

◯◯ = fast double click, Schneller Doppelklick

◯-◯- = slow double click,  Langsamer Doppelklick

◯-⥀ = hold button and turn, Knopf halten und drehen. 

ACTION       Funktion        Werte

Action	(Menu) Function	Values
onⒺ-	Factory Reset
⥀	VFO	20kHz..99MHz
Ⓛ	Enter menu
Ⓛ-⥀	Quick Enter menu
Ⓡ	Menu Exit
Ⓔ-⥀	1.1 Volume	1-15 in 6dB steps, 0 is Power-Off
offⓁ	Power-On
Ⓡ	1.2 Mode	LSB, USB, CW, AM, FM
ⓇⓇ	1.3 Filter BW	Full, 3000, 2400, 1800, 500, 200, 100, 50 Hz
ⒺⒺ	1.4 Band	80,60,40,30,20,17,15,12,10m
Ⓔ	1.5 Tuning Steps ↧	10M, 1M, 0.5M, 100k, 10k, 1k, 0.5k, 100, 10, 1
Ⓔ-	1.5 Tuning Steps ↥
Ⓡ-Ⓡ-	1.6 VFO Mode	VFO-A, B, Split
Ⓡ-	1.7 RIT	ON, OFF
ritⓇ	RIT Exit
	1.8 AGC	ON, OFF
	1.9 NR	0-8 exponential averaging step
	1.10 ATT	0, -13, -20, -33, -40, -53, -60, -73 dB
	1.11 ATT2	0-16 in 6dB steps
	1.12 S-meter	OFF, dBm, S, S-bar
	2.1 CW Decoder	ON, OFF
	2.4 Semi QSK	ON, OFF
	2.5 Keyer speed	10-40 Paris-WPM
	2.6 Keyer mode	Iambic-A, B, Straight
	2.7 Keyer swap	ON, OFF
	2.8 Practice	ON, OFF
	3.1 VOX	ON, OFF
	3.2 Noise Gate	0-255 in 6dB steps
	3.3 TX Drive	0-8 in 6dB steps, 8=constant amplitude
	3.4 TX Delay	0-255 ms
	4.1 CQ Interval	0-60 s
Ⓛ	4.2 CQ Message	Transmit CQ text
	8.1 PA Bias min	(0-255) representing 0% RF output
	8.2 PA Bias max	(0-255) representing 100% RF output
	8.3 Ref freq	si5351 crystal frequency in Hz
	8.4 IQ Phase	0..180 degrees
	10.1 Backlight	ON, OFF

onⒺ-	Factory Reset	ⓇⓇ	Audio Filter
⥀	VFO	ⒺⒺ	Band
Ⓛ	Enter menu	Ⓔ	Tuning Steps ↧
Ⓛ-⥀	Quick Enter menu	Ⓔ-	Tuning Steps ↥
Ⓡ	Menu Exit	Ⓡ-Ⓡ-	VFO-A, B, Split
Ⓔ-⥀	Volume/Power-Off	Ⓡ-	RIT
offⓁ	Power-On	ritⓇ	RIT Exit
Ⓡ	LSB, USB, CW, AM, FM	4.2Ⓛ	Transmit CQ message

onⒺ-	Factory Reset	ⓇⓇ	Audio Filter	⥀	VFO	Ⓡ-Ⓡ-	VFO-A, B, Split
Ⓛ	Enter menu	ⒺⒺ	Band	Ⓔ-⥀	Volume/Power-Off	Ⓡ-	RIT
Ⓛ-⥀	Quick Enter menu	Ⓔ	Tuning Steps ↧	offⓁ	Power-On	ritⓇ	RIT Exit
Ⓡ	Menu Exit	Ⓔ-	Tuning Steps ↥	Ⓡ	LSB, USB, CW, AM, FM	4.2Ⓛ	Transmit CQ message
1.1	Volume	1.9	NR	2.7	Keyer swap	8.1	PA Bias min ( 0% RF)
1.2	Mode	1.10	ATT	2.8	Practice	8.2	PA Bias max (100% RF)
1.3	Filter BW	1.11	ATT2	3.1	VOX	8.3	Ref freq
1.4	Band	1.12	S-meter	3.2	Noise Gate	8.4	IQ Phase
1.5	Tuning Steps	2.1	CW Decoder	3.3	TX Drive	10.1	Backlight
1.6	VFO Mode	2.4	Semi QSK	3.4	TX Delay
1.7	RIT	2.5	Keyer speed	4.1	CQ Interval
1.8	AGC	2.6	Keyer mode	4.2	CQ Message